❗Still in progress. The ISO does not yet contain a complete configuration.❗
But the arch installation is really quick. Just without any PwOSS configuration.
sudo pacman -S archiso git
git clone https://git.pwoss.org/server/iso.git cd /path/to/repo/ISO/ mkarchiso -v .
It is recommended to perform all the following steps as the root user with the umask set to
0022. If not, it is very likely that the live environment will have wrong file permissions.
profiledef.shto your needs.
Check the given ip address of your router for
Or nmap ...:
nmap -sn 192.168.1.0/24
Live ISO root user password is
Boot into your Live ISO and change the script before running it!
You NEED to change:
QDISKS="1" # Select the number "1" OR "2". If you have more than 2 hard drives, select 2.
ENCRYPTION="YES" # Select "YES" OR "NO" whether you want encryption or not.
That's the absolute minimum you have to change. Of course you can also change the passwords etc.. But stay between the 2 lines!
############################# Change only between the 2 lines
If you are installing Arch on a HDD hard disk instead of an SSD hard disk, you must delete
root_trim=yes from grub.
GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda2:root root=/dev/vg0/root resume=/dev/vg0/swap root_trim=yes"
You can easily add or delete your own packages. Do NOT delete from package
$MICROCODE (inlcuding $MICROCODE).
pwoss <[options]> -u [<username>] pwoss <[options]> --username=[<username>] Options: -h --help show this message -u --username set username e.g. $USERNAME -p --password set user password e.g. $PASSWORD -r --root-password set root password e.g. $PASSWORDROOT -e --encryption set encryption e.g. $ENCRYPTION -cr --crypt-root set root password e.g. $CRYPTPWDROOT -ch --crypt-home set home password e.g. $CRYPTPWDHOME -t --timezone set timezine e.g. $TIMEZONE -q --quantity-disks set numbers of hd e.g. $QDISKS -d --disk set install disk e.g. $HARDDISK -d2 --disk2 set home disk e.g. $HARDDISK2
Boot into any Arch Linux ISO and type the following:
pacman -Sy git git clone https://git.pwoss.org/server/iso.git cd ISO/airootfs/ ./pwoss-server.sh
The following items are also recommended:
The USB Stick is necessary for the installation of the system. Also, having a reliable USB stick from a reputable brand will help ensure that the process goes smoothly.
Download Etcher to flash the ISO
You have to align the boot-start to your USB-Stick.
Depending on your motherboard, you must press the "esc" or "f2" or "f12" or "end" key immediately after the PC starts.
Check your motherboard/computer manual if no button works or ask us.
Put the USB at the first place (with F5 and F6). Hit the button esc until save changes and reset. Hit enter and yes.
Reboot and choose Start: Boot Arch Linux (x86_64)
(After installing your operating system, you need to change back your BIOS settings)
Check of=/dev/sdX, if it's really your USB Stick!!!
sudo dd bs=4M if=~/Downloads/pwoss-server-*.iso of=/dev/sdX status=progress
You can also use Etcher if you prefer a graphical user interface (GUI).