updated to archiso v.46

airootfs/etc/hostname

@@ -1 +1,3 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
 archiso

airootfs/etc/locale.conf

@@ -1 +1,4 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 LANG=en_US.UTF-8

airootfs/etc/localtime

@@ -0,0 +1 @@
+/usr/share/zoneinfo/UTC

airootfs/etc/mkinitcpio.conf

@@ -0,0 +1,69 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES=(piix ide_disk reiserfs)
+MODULES=()
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image.  This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way.  This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+##   This setup specifies all modules in the MODULES setting above.
+##   No raid, lvm2, or encrypted root is needed.
+#    HOOKS=(base)
+#
+##   This setup will autodetect all modules for your system and should
+##   work as a sane default
+#    HOOKS=(base udev autodetect block filesystems)
+#
+##   This setup will generate a 'full' image which supports most systems.
+##   No autodetection is done.
+#    HOOKS=(base udev block filesystems)
+#
+##   This setup assembles a pata mdadm array with an encrypted root FS.
+##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
+#    HOOKS=(base udev block mdadm encrypt filesystems)
+#
+##   This setup loads an lvm2 volume group on a usb device.
+#    HOOKS=(base udev block lvm2 filesystems)
+#
+##   NOTE: If you have /usr on a separate partition, you MUST include the
+#    usr, fsck and shutdown hooks.
+HOOKS=(base udev memdisk archiso_shutdown archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, gzip compression
+# is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()

airootfs/etc/mkinitcpio.d/linux.preset

@@ -0,0 +1,11 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# mkinitcpio preset file for the 'linux' package on archiso
+
+PRESETS=('archiso')
+
+ALL_kver='/boot/vmlinuz-linux'
+ALL_config='/etc/mkinitcpio.conf'
+
+archiso_image="/boot/archiso.img"

airootfs/etc/motd

@@ -0,0 +1,9 @@
+To install Arch Linux follow the installation guide:
+https://wiki.archlinux.org/index.php/Installation_guide
+
+For Wi-Fi, authenticate to the wireless network using the iwctl utility.
+Ethernet and Wi-Fi connections using DHCP should work automatically.
+
+After connecting to the internet, the installation guide can be accessed
+via the convenience script Installation_guide.
+

airootfs/etc/passwd

@@ -0,0 +1 @@
+root:x:0:0:root:/root:/usr/bin/zsh

airootfs/etc/resolv.conf

@@ -0,0 +1 @@
+/run/systemd/resolve/stub-resolv.conf

airootfs/etc/shadow

@@ -0,0 +1 @@
+root::14871::::::

airootfs/etc/ssh/sshd_config

@@ -0,0 +1,116 @@
+#	$OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile	.ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+ChallengeResponseAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no # pam does that
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib/ssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server

airootfs/etc/systemd/journald.conf.d/volatile-storage.conf

@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Journal]
+Storage=volatile

airootfs/etc/systemd/logind.conf.d/do-not-suspend.conf

@@ -0,0 +1,7 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Login]
+HandleSuspendKey=ignore
+HandleHibernateKey=ignore
+HandleLidSwitch=ignore

airootfs/etc/systemd/network/20-ethernet.network

@@ -0,0 +1,13 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Match]
+Name=en*
+Name=eth*
+
+[Network]
+DHCP=yes
+IPv6PrivacyExtensions=yes
+
+[DHCP]
+RouteMetric=512

airootfs/etc/systemd/network/20-wireless.network

@@ -0,0 +1,13 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Match]
+Name=wlp*
+Name=wlan*
+
+[Network]
+DHCP=yes
+IPv6PrivacyExtensions=yes
+
+[DHCP]
+RouteMetric=1024

airootfs/etc/systemd/system/choose-mirror.service

@@ -1,10 +1,13 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 [Unit]
 Description=Choose mirror from the kernel command line
 ConditionKernelCommandLine=mirror
 
 [Service]
 Type=oneshot
-ExecStart=/etc/systemd/scripts/choose-mirror
+ExecStart=/usr/local/bin/choose-mirror
 
 [Install]
 WantedBy=multi-user.target

airootfs/etc/systemd/system/dbus-org.freedesktop.network1.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-networkd.service

airootfs/etc/systemd/system/dbus-org.freedesktop.resolve1.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-resolved.service

airootfs/etc/systemd/system/etc-pacman.d-gnupg.mount

@@ -1,3 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 [Unit]
 Description=Temporary /etc/pacman.d/gnupg directory
 

airootfs/etc/systemd/system/getty@tty1.service.d/autologin.conf

@@ -1,3 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 [Service]
 ExecStart=
 ExecStart=-/sbin/agetty --autologin root --noclear %I 38400 linux

airootfs/etc/systemd/system/multi-user.target.wants/choose-mirror.service

@@ -0,0 +1 @@
+../choose-mirror.service

airootfs/etc/systemd/system/multi-user.target.wants/iwd.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/iwd.service

airootfs/etc/systemd/system/multi-user.target.wants/pacman-init.service

@@ -0,0 +1 @@
+../pacman-init.service

airootfs/etc/systemd/system/multi-user.target.wants/reflector.service

@@ -0,0 +1 @@
+../reflector.service

airootfs/etc/systemd/system/multi-user.target.wants/systemd-networkd.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-networkd.service

airootfs/etc/systemd/system/multi-user.target.wants/systemd-resolved.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-resolved.service

airootfs/etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-networkd-wait-online.service

airootfs/etc/systemd/system/pacman-init.service

@@ -1,3 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 [Unit]
 Description=Initializes Pacman keyring
 Wants=haveged.service

airootfs/etc/systemd/system/reflector.service

@@ -0,0 +1,44 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Unit]
+Description=pacman mirrorlist update
+Wants=network-online.target
+After=network-online.target nss-lookup.target
+ConditionKernelCommandLine=!mirror
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/reflector --protocol https --latest 70 --sort rate --save /etc/pacman.d/mirrorlist
+Restart=on-failure
+RestartSec=10
+CacheDirectory=reflector
+CapabilityBoundingSet=~CAP_SETUID CAP_SETGID CAP_SETPCAP CAP_SYS_ADMIN CAP_SYS_PTRACE CAP_CHOWN CAP_FSETID CAP_SETFCAP CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH CAP_FOWNER CAP_IPC_OWNER CAP_NET_ADMIN CAP_SYS_TIME CAP_AUDIT_CONTROL CAP_AUDIT_READ CAP_AUDIT_WRITE CAP_KILL CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SYS_NICE CAP_SYS_RESOURCE CAP_MAC_ADMIN CAP_MAC_OVERRIDE CAP_SYS_BOOT CAP_LINUX_IMMUTABLE CAP_IPC_LOCK CAP_SYS_CHROOT CAP_BLOCK_SUSPEND CAP_LEASE CAP_SYS_PACCT CAP_SYS_TTY_CONFIG CAP_WAKE_ALARM
+Environment=XDG_CACHE_HOME=/var/cache/reflector
+LockPersonality=true
+MemoryDenyWriteExecute=true
+NoNewPrivileges=true
+PrivateDevices=true
+PrivateTmp=true
+PrivateUsers=true
+ProtectClock=true
+ProtectControlGroups=true
+ProtectHome=true
+ProtectHostname=true
+ProtectKernelTunables=true
+ProtectKernelLogs=true
+ProtectKernelModules=true
+ProtectSystem=strict
+ReadWritePaths=/etc/pacman.d/mirrorlist
+RemoveIPC=true
+RestrictAddressFamilies=~AF_AX25 AF_IPX AF_APPLETALK AF_X25 AF_DECnet AF_KEY AF_NETLINK AF_PACKET AF_RDS AF_PPPOX AF_LLC AF_IB AF_MPLS AF_CAN AF_TIPC AF_BLUETOOTH AF_ALG AF_VSOCK AF_KCM AF_UNIX AF_XDP
+RestrictNamespaces=true
+RestrictRealtime=true
+RestrictSUIDSGID=true
+SystemCallArchitectures=native
+SystemCallFilter=@system-service
+SystemCallFilter=~@resources @privileged
+UMask=177
+
+[Install]
+WantedBy=multi-user.target

airootfs/etc/systemd/system/sockets.target.wants/systemd-networkd.socket

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-networkd.socket

airootfs/etc/systemd/system/systemd-networkd-wait-online.service.d/wait-for-only-one-interface.conf

@@ -0,0 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Service]
+ExecStart=
+ExecStart=/usr/lib/systemd/systemd-networkd-wait-online --any

airootfs/etc/udev/rules.d/81-dhcpcd.rules

@@ -1 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", ENV{INTERFACE}=="en*|eth*", ENV{SYSTEMD_WANTS}="dhcpcd@$name.service"

airootfs/root/.automated_script.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 script_cmdline ()
 {
@@ -15,8 +15,8 @@ automated_script ()
     local script rt
     script="$(script_cmdline)"
     if [[ -n "${script}" && ! -x /tmp/startup_script ]]; then
-        if [[ "${script}" =~ ^http:// || "${script}" =~ ^ftp:// ]]; then
-            wget "${script}" --retry-connrefused -q -O /tmp/startup_script >/dev/null
+        if [[ "${script}" =~ ^((http|https|ftp)://) ]]; then
+            curl "${script}" --retry-connrefused -s -o /tmp/startup_script >/dev/null
             rt=$?
         else
             cp "${script}" /tmp/startup_script

airootfs/root/customize_airootfs.sh

@@ -1,23 +1,12 @@
-#!/bin/bash
+#!/usr/bin/env bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
 
 set -e -u
 
+echo 'Warning: customize_airootfs.sh is deprecated! Support for it will be removed in a future archiso version.'
+
 sed -i 's/#\(en_US\.UTF-8\)/\1/' /etc/locale.gen
 locale-gen
 
-ln -sf /usr/share/zoneinfo/UTC /etc/localtime
-
-usermod -s /usr/bin/zsh root
-cp -aT /etc/skel/ /root/
-chmod 700 /root
-
-sed -i 's/#\(PermitRootLogin \).\+/\1yes/' /etc/ssh/sshd_config
 sed -i "s/#Server/Server/g" /etc/pacman.d/mirrorlist
-sed -i 's/#\(Storage=\)auto/\1volatile/' /etc/systemd/journald.conf
-
-sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' /etc/systemd/logind.conf
-sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' /etc/systemd/logind.conf
-sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' /etc/systemd/logind.conf
-
-systemctl enable pacman-init.service choose-mirror.service
-systemctl set-default multi-user.target

airootfs/root/install.txt

@@ -1,8 +0,0 @@
-View the Arch official installation guide online at
-https://wiki.archlinux.org/index.php/Installation_Guide
-
-Check PwOSS - Wiki guide at
-https://wiki.pwoss.org/content/desktop/arch
-
-Create an issue at PwOSS - Gitea if you run into any problems
-https://git.pwoss.org/desktop/iso/issues

airootfs/root/pwoss-desktop.sh

@@ -64,7 +64,7 @@ DESKTOP="plasma"                    # Select your desktop environment at 'https:
 MINIMUM="base linux linux-firmware linux-headers base-devel $DESKTOP xorg grub efibootmgr xorg-xinit pulseaudio pulseaudio-alsa networkmanager networkmanager-openvpn haveged sddm lvm2 $MICROCODE"     # Minimum packages to get the desktop up and running.  
 KDE="konsole keditbookmarks dolphin kate kdeconnect kaddressbook okular gwenview packagekit-qt5"     # KDE pkgs. Change it if you change "## DESKTOP ENV"
 OFFICE="thunderbird thunderbird-i18n-en-us wqy-zenhei ttf-liberation libreoffice-fresh cups cups-pdf xsane system-config-printer"     # Office pkgs. Delete or add to your needs
-SECURITY="sudo ufw openssh keepassxc rsync smbclient"     # "Security/Privacy" pkgs
+SECURITY="sudo ufw openssh keepassxc rsync smbclient wireguard-tools"     # "Security/Privacy" pkgs
 OTHER="bash-completion git archiso firefox vlc reflector nano lm_sensors tree wget"     # Other usefull pkgs
 
 ## Enable services

airootfs/usr/local/bin/Installation_guide

@@ -0,0 +1,5 @@
+#!/bin/sh
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+exec lynx 'https://wiki.archlinux.org/index.php/Installation_guide'

airootfs/usr/local/bin/choose-mirror

@@ -1,4 +1,6 @@
 #!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
 
 get_cmdline() {
     local param

build.sh

@@ -1,4 +1,6 @@
-#!/bin/bash
+#!/usr/bin/env bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
 
 set -e -u
 
@@ -10,10 +12,10 @@ iso_version=$(date +%Y.%m.%d)
 install_dir=arch
 work_dir=work
 out_dir=out
-gpg_key=
+gpg_key=""
 
 verbose=""
-script_path=$(readlink -f ${0%/*})
+script_path="$( cd -P "$( dirname "$(readlink -f "$0")" )" && pwd )"
 
 umask 0022
 
@@ -40,188 +42,228 @@ _usage ()
     echo "                        Default: ${out_dir}"
     echo "    -v                 Enable verbose output"
     echo "    -h                 This help message"
-    exit ${1}
+    exit "${1}"
 }
 
 # Helper function to run make_*() only one time per architecture.
 run_once() {
-    if [[ ! -e ${work_dir}/build.${1} ]]; then
-        $1
-        touch ${work_dir}/build.${1}
+    if [[ ! -e "${work_dir}/build.${1}" ]]; then
+        "$1"
+        touch "${work_dir}/build.${1}"
     fi
 }
 
 # Setup custom pacman.conf with current cache directories.
 make_pacman_conf() {
     local _cache_dirs
-    _cache_dirs=($(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
-    sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n ${_cache_dirs[@]})|g" ${script_path}/pacman.conf > ${work_dir}/pacman.conf
+    _cache_dirs=("$(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g')")
+    sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n "${_cache_dirs[@]}")|g" \
+        "${script_path}/pacman.conf" > "${work_dir}/pacman.conf"
 }
 
-# Base installation, plus needed packages (airootfs)
-make_basefs() {
-    mkarchiso ${verbose} -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" init
-    mkarchiso ${verbose} -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" -p "haveged intel-ucode amd-ucode memtest86+ mkinitcpio-nfs-utils nbd zsh efitools" install
+# Prepare working directory and copy custom airootfs files (airootfs)
+make_custom_airootfs() {
+    local _airootfs="${work_dir}/x86_64/airootfs"
+    mkdir -p -- "${_airootfs}"
+
+    if [[ -d "${script_path}/airootfs" ]]; then
+        cp -af --no-preserve=ownership -- "${script_path}/airootfs/." "${_airootfs}"
+
+        [[ -e "${_airootfs}/etc/shadow" ]] && chmod -f 0400 -- "${_airootfs}/etc/shadow"
+        [[ -e "${_airootfs}/etc/gshadow" ]] && chmod -f 0400 -- "${_airootfs}/etc/gshadow"
+
+        # Set up user home directories and permissions
+        if [[ -e "${_airootfs}/etc/passwd" ]]; then
+            while IFS=':' read -a passwd -r; do
+                [[ "${passwd[5]}" == '/' ]] && continue
+
+                if [[ -d "${_airootfs}${passwd[5]}" ]]; then
+                    chown -hR -- "${passwd[2]}:${passwd[3]}" "${_airootfs}${passwd[5]}"
+                    chmod -f 0750 -- "${_airootfs}${passwd[5]}"
+                else
+                    install -d -m 0750 -o "${passwd[2]}" -g "${passwd[3]}" -- "${_airootfs}${passwd[5]}"
+                fi
+             done < "${_airootfs}/etc/passwd"
+        fi
+    fi
 }
 
-# Additional packages (airootfs)
+# Packages (airootfs)
 make_packages() {
-    mkarchiso ${verbose} -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" -p "$(grep -h -v ^# ${script_path}/packages.x86_64)" install
-}
-
-# Copy mkinitcpio archiso hooks and build initramfs (airootfs)
-make_setup_mkinitcpio() {
-    local _hook
-    mkdir -p ${work_dir}/x86_64/airootfs/etc/initcpio/hooks
-    mkdir -p ${work_dir}/x86_64/airootfs/etc/initcpio/install
-    for _hook in archiso archiso_shutdown archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_loop_mnt; do
-        cp /usr/lib/initcpio/hooks/${_hook} ${work_dir}/x86_64/airootfs/etc/initcpio/hooks
-        cp /usr/lib/initcpio/install/${_hook} ${work_dir}/x86_64/airootfs/etc/initcpio/install
-    done
-    sed -i "s|/usr/lib/initcpio/|/etc/initcpio/|g" ${work_dir}/x86_64/airootfs/etc/initcpio/install/archiso_shutdown
-    cp /usr/lib/initcpio/install/archiso_kms ${work_dir}/x86_64/airootfs/etc/initcpio/install
-    cp /usr/lib/initcpio/archiso_shutdown ${work_dir}/x86_64/airootfs/etc/initcpio
-    cp ${script_path}/mkinitcpio.conf ${work_dir}/x86_64/airootfs/etc/mkinitcpio-archiso.conf
-    gnupg_fd=
-    if [[ ${gpg_key} ]]; then
-      gpg --export ${gpg_key} >${work_dir}/gpgkey
-      exec 17<>${work_dir}/gpgkey
+    if [[ "${gpg_key}" ]]; then
+      gpg --export "${gpg_key}" > "${work_dir}/gpgkey"
+      exec 17<>"${work_dir}/gpgkey"
     fi
-    ARCHISO_GNUPG_FD=${gpg_key:+17} mkarchiso ${verbose} -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' run
-    if [[ ${gpg_key} ]]; then
+    if [ -n "${verbose}" ]; then
+        ARCHISO_GNUPG_FD="${gpg_key:+17}" mkarchiso -v -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" \
+            -p "$(grep -h -v '^#' "${script_path}/packages.x86_64"| sed ':a;N;$!ba;s/\n/ /g')" install
+    else
+        ARCHISO_GNUPG_FD="${gpg_key:+17}" mkarchiso -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" \
+            -p "$(grep -h -v '^#' "${script_path}/packages.x86_64"| sed ':a;N;$!ba;s/\n/ /g')" install
+    fi
+    if [[ "${gpg_key}" ]]; then
       exec 17<&-
     fi
 }
 
 # Customize installation (airootfs)
 make_customize_airootfs() {
-    cp -af ${script_path}/airootfs ${work_dir}/x86_64
-
-    cp ${script_path}/pacman.conf ${work_dir}/x86_64/airootfs/etc
+    if [[ -e "${script_path}/airootfs/etc/passwd" ]]; then
+        while IFS=':' read -a passwd -r; do
+            [[ "${passwd[5]}" == '/' ]] && continue
+            cp -RdT --preserve=mode,timestamps,links -- "${work_dir}/x86_64/airootfs/etc/skel" "${work_dir}/x86_64/airootfs${passwd[5]}"
+            chown -hR -- "${passwd[2]}:${passwd[3]}" "${work_dir}/x86_64/airootfs${passwd[5]}"
 
-    curl -o ${work_dir}/x86_64/airootfs/etc/pacman.d/mirrorlist 'https://www.archlinux.org/mirrorlist/?country=all&protocol=http&use_mirror_status=on'
-
-    lynx -dump -nolist 'https://wiki.archlinux.org/index.php/Installation_Guide?action=render' >> ${work_dir}/x86_64/airootfs/root/install.txt
+        done < "${script_path}/airootfs/etc/passwd"
+    fi
 
-    mkarchiso ${verbose} -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" -r '/root/customize_airootfs.sh' run
-    rm ${work_dir}/x86_64/airootfs/root/customize_airootfs.sh
+    if [[ -e "${work_dir}/x86_64/airootfs/root/customize_airootfs.sh" ]]; then
+        if [ -n "${verbose}" ]; then
+            mkarchiso -v -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" \
+                -r '/root/customize_airootfs.sh' run
+        else
+            mkarchiso -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" \
+                -r '/root/customize_airootfs.sh' run
+        fi
+        rm "${work_dir}/x86_64/airootfs/root/customize_airootfs.sh"
+    fi
 }
 
 # Prepare kernel/initramfs ${install_dir}/boot/
 make_boot() {
-    mkdir -p ${work_dir}/iso/${install_dir}/boot/x86_64
-    cp ${work_dir}/x86_64/airootfs/boot/archiso.img ${work_dir}/iso/${install_dir}/boot/x86_64/archiso.img
-    cp ${work_dir}/x86_64/airootfs/boot/vmlinuz-linux ${work_dir}/iso/${install_dir}/boot/x86_64/vmlinuz
+    mkdir -p "${work_dir}/iso/${install_dir}/boot/x86_64"
+    cp "${work_dir}/x86_64/airootfs/boot/archiso.img" "${work_dir}/iso/${install_dir}/boot/x86_64/"
+    cp "${work_dir}/x86_64/airootfs/boot/vmlinuz-linux" "${work_dir}/iso/${install_dir}/boot/x86_64/"
 }
 
 # Add other aditional/extra files to ${install_dir}/boot/
 make_boot_extra() {
-    cp ${work_dir}/x86_64/airootfs/boot/memtest86+/memtest.bin ${work_dir}/iso/${install_dir}/boot/memtest
-    cp ${work_dir}/x86_64/airootfs/usr/share/licenses/common/GPL2/license.txt ${work_dir}/iso/${install_dir}/boot/memtest.COPYING
-    cp ${work_dir}/x86_64/airootfs/boot/intel-ucode.img ${work_dir}/iso/${install_dir}/boot/intel_ucode.img
-    cp ${work_dir}/x86_64/airootfs/usr/share/licenses/intel-ucode/LICENSE ${work_dir}/iso/${install_dir}/boot/intel_ucode.LICENSE
-    cp ${work_dir}/x86_64/airootfs/boot/amd-ucode.img ${work_dir}/iso/${install_dir}/boot/amd_ucode.img
-    cp ${work_dir}/x86_64/airootfs/usr/share/licenses/amd-ucode/LICENSE ${work_dir}/iso/${install_dir}/boot/amd_ucode.LICENSE
+    if [[ -e "${work_dir}/x86_64/airootfs/boot/memtest86+/memtest.bin" ]]; then
+        # rename for PXE: https://wiki.archlinux.org/index.php/Syslinux#Using_memtest
+        cp "${work_dir}/x86_64/airootfs/boot/memtest86+/memtest.bin" "${work_dir}/iso/${install_dir}/boot/memtest"
+        mkdir -p "${work_dir}/iso/${install_dir}/boot/licenses/memtest86+/"
+        cp "${work_dir}/x86_64/airootfs/usr/share/licenses/common/GPL2/license.txt" \
+            "${work_dir}/iso/${install_dir}/boot/licenses/memtest86+/"
+    fi
+    if [[ -e "${work_dir}/x86_64/airootfs/boot/intel-ucode.img" ]]; then
+        cp "${work_dir}/x86_64/airootfs/boot/intel-ucode.img" "${work_dir}/iso/${install_dir}/boot/"
+        mkdir -p "${work_dir}/iso/${install_dir}/boot/licenses/intel-ucode/"
+        cp "${work_dir}/x86_64/airootfs/usr/share/licenses/intel-ucode/"* \
+            "${work_dir}/iso/${install_dir}/boot/licenses/intel-ucode/"
+    fi
+    if [[ -e "${work_dir}/x86_64/airootfs/boot/amd-ucode.img" ]]; then
+        cp "${work_dir}/x86_64/airootfs/boot/amd-ucode.img" "${work_dir}/iso/${install_dir}/boot/"
+        mkdir -p "${work_dir}/iso/${install_dir}/boot/licenses/amd-ucode/"
+        cp "${work_dir}/x86_64/airootfs/usr/share/licenses/amd-ucode/"* \
+            "${work_dir}/iso/${install_dir}/boot/licenses/amd-ucode/"
+    fi
 }
 
 # Prepare /${install_dir}/boot/syslinux
 make_syslinux() {
-    _uname_r=$(file -b ${work_dir}/x86_64/airootfs/boot/vmlinuz-linux| awk 'f{print;f=0} /version/{f=1}' RS=' ')
-    mkdir -p ${work_dir}/iso/${install_dir}/boot/syslinux
-    for _cfg in ${script_path}/syslinux/*.cfg; do
+    _uname_r=$(file -b "${work_dir}/x86_64/airootfs/boot/vmlinuz-linux"| awk 'f{print;f=0} /version/{f=1}' RS=' ')
+    mkdir -p "${work_dir}/iso/${install_dir}/boot/syslinux"
+    for _cfg in "${script_path}/syslinux/"*.cfg; do
         sed "s|%ARCHISO_LABEL%|${iso_label}|g;
-             s|%INSTALL_DIR%|${install_dir}|g" ${_cfg} > ${work_dir}/iso/${install_dir}/boot/syslinux/${_cfg##*/}
+             s|%INSTALL_DIR%|${install_dir}|g" "${_cfg}" > "${work_dir}/iso/${install_dir}/boot/syslinux/${_cfg##*/}"
     done
-    cp ${script_path}/syslinux/splash.png ${work_dir}/iso/${install_dir}/boot/syslinux
-    cp ${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/*.c32 ${work_dir}/iso/${install_dir}/boot/syslinux
-    cp ${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/lpxelinux.0 ${work_dir}/iso/${install_dir}/boot/syslinux
-    cp ${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/memdisk ${work_dir}/iso/${install_dir}/boot/syslinux
-    mkdir -p ${work_dir}/iso/${install_dir}/boot/syslinux/hdt
-    gzip -c -9 ${work_dir}/x86_64/airootfs/usr/share/hwdata/pci.ids > ${work_dir}/iso/${install_dir}/boot/syslinux/hdt/pciids.gz
-    gzip -c -9 ${work_dir}/x86_64/airootfs/usr/lib/modules/${_uname_r}/modules.alias > ${work_dir}/iso/${install_dir}/boot/syslinux/hdt/modalias.gz
+    cp "${script_path}/syslinux/splash.png" "${work_dir}/iso/${install_dir}/boot/syslinux/"
+    cp "${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/"*.c32 "${work_dir}/iso/${install_dir}/boot/syslinux/"
+    cp "${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/lpxelinux.0" "${work_dir}/iso/${install_dir}/boot/syslinux/"
+    cp "${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/memdisk" "${work_dir}/iso/${install_dir}/boot/syslinux/"
+    mkdir -p "${work_dir}/iso/${install_dir}/boot/syslinux/hdt"
+    gzip -c -9 "${work_dir}/x86_64/airootfs/usr/share/hwdata/pci.ids" > \
+        "${work_dir}/iso/${install_dir}/boot/syslinux/hdt/pciids.gz"
+    gzip -c -9 "${work_dir}/x86_64/airootfs/usr/lib/modules/${_uname_r}/modules.alias" > \
+        "${work_dir}/iso/${install_dir}/boot/syslinux/hdt/modalias.gz"
 }
 
 # Prepare /isolinux
 make_isolinux() {
-    mkdir -p ${work_dir}/iso/isolinux
-    sed "s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/isolinux/isolinux.cfg > ${work_dir}/iso/isolinux/isolinux.cfg
-    cp ${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/isolinux.bin ${work_dir}/iso/isolinux/
-    cp ${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/isohdpfx.bin ${work_dir}/iso/isolinux/
-    cp ${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/ldlinux.c32 ${work_dir}/iso/isolinux/
+    mkdir -p "${work_dir}/iso/isolinux"
+    sed "s|%INSTALL_DIR%|${install_dir}|g" \
+        "${script_path}/isolinux/isolinux.cfg" > "${work_dir}/iso/isolinux/isolinux.cfg"
+    cp "${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/isolinux.bin" "${work_dir}/iso/isolinux/"
+    cp "${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/isohdpfx.bin" "${work_dir}/iso/isolinux/"
+    cp "${work_dir}/x86_64/airootfs/usr/lib/syslinux/bios/ldlinux.c32" "${work_dir}/iso/isolinux/"
 }
 
 # Prepare /EFI
 make_efi() {
-    mkdir -p ${work_dir}/iso/EFI/boot
-    cp ${work_dir}/x86_64/airootfs/usr/share/efitools/efi/PreLoader.efi ${work_dir}/iso/EFI/boot/bootx64.efi
-    cp ${work_dir}/x86_64/airootfs/usr/share/efitools/efi/HashTool.efi ${work_dir}/iso/EFI/boot/
+    mkdir -p "${work_dir}/iso/EFI/boot"
+    cp "${work_dir}/x86_64/airootfs/usr/lib/systemd/boot/efi/systemd-bootx64.efi" \
+        "${work_dir}/iso/EFI/boot/bootx64.efi"
 
-    cp ${work_dir}/x86_64/airootfs/usr/lib/systemd/boot/efi/systemd-bootx64.efi ${work_dir}/iso/EFI/boot/loader.efi
-
-    mkdir -p ${work_dir}/iso/loader/entries
-    cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/iso/loader/
-    cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/iso/loader/entries/
-    cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/iso/loader/entries/
+    mkdir -p "${work_dir}/iso/loader/entries"
+    cp "${script_path}/efiboot/loader/loader.conf" "${work_dir}/iso/loader/"
 
     sed "s|%ARCHISO_LABEL%|${iso_label}|g;
          s|%INSTALL_DIR%|${install_dir}|g" \
-        ${script_path}/efiboot/loader/entries/archiso-x86_64-usb.conf > ${work_dir}/iso/loader/entries/archiso-x86_64.conf
+        "${script_path}/efiboot/loader/entries/archiso-x86_64-usb.conf" > \
+        "${work_dir}/iso/loader/entries/archiso-x86_64.conf"
 
-    # EFI Shell 2.0 for UEFI 2.3+
-    curl -o ${work_dir}/iso/EFI/shellx64_v2.efi https://raw.githubusercontent.com/tianocore/edk2/UDK2018/ShellBinPkg/UefiShell/X64/Shell.efi
-    # EFI Shell 1.0 for non UEFI 2.3+
-    curl -o ${work_dir}/iso/EFI/shellx64_v1.efi https://raw.githubusercontent.com/tianocore/edk2/UDK2018/EdkShellBinPkg/FullShell/X64/Shell_Full.efi
+    # edk2-shell based UEFI shell
+    # shellx64.efi is picked up automatically when on /
+    cp "${work_dir}/x86_64/airootfs/usr/share/edk2-shell/x64/Shell_Full.efi" "${work_dir}/iso/shellx64.efi"
 }
 
 # Prepare efiboot.img::/EFI for "El Torito" EFI boot mode
 make_efiboot() {
-    mkdir -p ${work_dir}/iso/EFI/archiso
-    truncate -s 64M ${work_dir}/iso/EFI/archiso/efiboot.img
-    mkfs.fat -n ARCHISO_EFI ${work_dir}/iso/EFI/archiso/efiboot.img
-
-    mkdir -p ${work_dir}/efiboot
-    mount ${work_dir}/iso/EFI/archiso/efiboot.img ${work_dir}/efiboot
+    mkdir -p "${work_dir}/iso/EFI/archiso"
+    truncate -s 64M "${work_dir}/iso/EFI/archiso/efiboot.img"
+    mkfs.fat -n ARCHISO_EFI "${work_dir}/iso/EFI/archiso/efiboot.img"
 
-    mkdir -p ${work_dir}/efiboot/EFI/archiso
-    cp ${work_dir}/iso/${install_dir}/boot/x86_64/vmlinuz ${work_dir}/efiboot/EFI/archiso/vmlinuz.efi
-    cp ${work_dir}/iso/${install_dir}/boot/x86_64/archiso.img ${work_dir}/efiboot/EFI/archiso/archiso.img
+    mkdir -p "${work_dir}/efiboot"
+    mount "${work_dir}/iso/EFI/archiso/efiboot.img" "${work_dir}/efiboot"
 
-    cp ${work_dir}/iso/${install_dir}/boot/intel_ucode.img ${work_dir}/efiboot/EFI/archiso/intel_ucode.img
-    cp ${work_dir}/iso/${install_dir}/boot/amd_ucode.img ${work_dir}/efiboot/EFI/archiso/amd_ucode.img
+    mkdir -p "${work_dir}/efiboot/EFI/archiso"
+    cp "${work_dir}/iso/${install_dir}/boot/x86_64/vmlinuz-linux" "${work_dir}/efiboot/EFI/archiso/"
+    cp "${work_dir}/iso/${install_dir}/boot/x86_64/archiso.img" "${work_dir}/efiboot/EFI/archiso/"
 
-    mkdir -p ${work_dir}/efiboot/EFI/boot
-    cp ${work_dir}/x86_64/airootfs/usr/share/efitools/efi/PreLoader.efi ${work_dir}/efiboot/EFI/boot/bootx64.efi
-    cp ${work_dir}/x86_64/airootfs/usr/share/efitools/efi/HashTool.efi ${work_dir}/efiboot/EFI/boot/
+    cp "${work_dir}/iso/${install_dir}/boot/intel-ucode.img" "${work_dir}/efiboot/EFI/archiso/"
+    cp "${work_dir}/iso/${install_dir}/boot/amd-ucode.img" "${work_dir}/efiboot/EFI/archiso/"
 
-    cp ${work_dir}/x86_64/airootfs/usr/lib/systemd/boot/efi/systemd-bootx64.efi ${work_dir}/efiboot/EFI/boot/loader.efi
+    mkdir -p "${work_dir}/efiboot/EFI/boot"
+    cp "${work_dir}/x86_64/airootfs/usr/lib/systemd/boot/efi/systemd-bootx64.efi" \
+        "${work_dir}/efiboot/EFI/boot/bootx64.efi"
 
-    mkdir -p ${work_dir}/efiboot/loader/entries
-    cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/efiboot/loader/
-    cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/efiboot/loader/entries/
-    cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/efiboot/loader/entries/
+    mkdir -p "${work_dir}/efiboot/loader/entries"
+    cp "${script_path}/efiboot/loader/loader.conf" "${work_dir}/efiboot/loader/"
 
     sed "s|%ARCHISO_LABEL%|${iso_label}|g;
          s|%INSTALL_DIR%|${install_dir}|g" \
-        ${script_path}/efiboot/loader/entries/archiso-x86_64-cd.conf > ${work_dir}/efiboot/loader/entries/archiso-x86_64.conf
+        "${script_path}/efiboot/loader/entries/archiso-x86_64-cd.conf" > \
+        "${work_dir}/efiboot/loader/entries/archiso-x86_64.conf"
 
-    cp ${work_dir}/iso/EFI/shellx64_v2.efi ${work_dir}/efiboot/EFI/
-    cp ${work_dir}/iso/EFI/shellx64_v1.efi ${work_dir}/efiboot/EFI/
+    # shellx64.efi is picked up automatically when on /
+    cp "${work_dir}/iso/shellx64.efi" "${work_dir}/efiboot/"
 
-    umount -d ${work_dir}/efiboot
+    umount -d "${work_dir}/efiboot"
 }
 
 # Build airootfs filesystem image
 make_prepare() {
-    cp -a -l -f ${work_dir}/x86_64/airootfs ${work_dir}
-    mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" pkglist
-    mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" ${gpg_key:+-g ${gpg_key}} prepare
-    rm -rf ${work_dir}/airootfs
-    # rm -rf ${work_dir}/x86_64/airootfs (if low space, this helps)
+    cp -a -l -f "${work_dir}/x86_64/airootfs" "${work_dir}"
+    if [ -n "${verbose}" ]; then
+        mkarchiso -v -w "${work_dir}" -D "${install_dir}" pkglist
+        mkarchiso -v -w "${work_dir}" -D "${install_dir}" ${gpg_key:+-g ${gpg_key}} prepare
+    else
+        mkarchiso -w "${work_dir}" -D "${install_dir}" pkglist
+        mkarchiso -w "${work_dir}" -D "${install_dir}" ${gpg_key:+-g ${gpg_key}} prepare
+    fi
+    rm -rf "${work_dir}/airootfs"
+    # rm -rf "${work_dir}/x86_64/airootfs" (if low space, this helps)
 }
 
 # Build ISO
 make_iso() {
-    mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" -L "${iso_label}" -P "${iso_publisher}" -A "${iso_application}" -o "${out_dir}" iso "${iso_name}-${iso_version}-x86_64.iso"
+    if [ -n "${verbose}" ]; then
+        mkarchiso -v -w "${work_dir}" -D "${install_dir}" -L "${iso_label}" -P "${iso_publisher}" \
+            -A "${iso_application}" -o "${out_dir}" iso "${iso_name}-${iso_version}-x86_64.iso"
+    else
+        mkarchiso -w "${work_dir}" -D "${install_dir}" -L "${iso_label}" -P "${iso_publisher}" \
+            -A "${iso_application}" -o "${out_dir}" iso "${iso_name}-${iso_version}-x86_64.iso"
+    fi
 }
 
 if [[ ${EUID} -ne 0 ]]; then
@@ -249,12 +291,11 @@ while getopts 'N:V:L:P:A:D:w:o:g:vh' arg; do
     esac
 done
 
-mkdir -p ${work_dir}
+mkdir -p "${work_dir}"
 
 run_once make_pacman_conf
-run_once make_basefs
+run_once make_custom_airootfs
 run_once make_packages
-run_once make_setup_mkinitcpio
 run_once make_customize_airootfs
 run_once make_boot
 run_once make_boot_extra

efiboot/loader/entries/archiso-x86_64-cd.conf

@@ -1,6 +1,9 @@
-title   Arch Linux archiso x86_64 UEFI CD
-linux   /EFI/archiso/vmlinuz.efi
-initrd  /EFI/archiso/intel_ucode.img
-initrd  /EFI/archiso/amd_ucode.img
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+title   Arch Linux install medium (x86_64, UEFI)
+linux   /EFI/archiso/vmlinuz-linux
+initrd  /EFI/archiso/intel-ucode.img
+initrd  /EFI/archiso/amd-ucode.img
 initrd  /EFI/archiso/archiso.img
 options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%

efiboot/loader/entries/archiso-x86_64-usb.conf

@@ -1,6 +1,9 @@
-title   Arch Linux archiso x86_64 UEFI USB
-linux   /%INSTALL_DIR%/boot/x86_64/vmlinuz
-initrd  /%INSTALL_DIR%/boot/intel_ucode.img
-initrd  /%INSTALL_DIR%/boot/amd_ucode.img
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+title   Arch Linux install medium (x86_64, UEFI)
+linux   /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+initrd  /%INSTALL_DIR%/boot/intel-ucode.img
+initrd  /%INSTALL_DIR%/boot/amd-ucode.img
 initrd  /%INSTALL_DIR%/boot/x86_64/archiso.img
 options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%

efiboot/loader/entries/uefi-shell-v1-x86_64.conf

@@ -1,2 +0,0 @@
-title  UEFI Shell x86_64 v1
-efi    /EFI/shellx64_v1.efi

efiboot/loader/entries/uefi-shell-v2-x86_64.conf

@@ -1,2 +0,0 @@
-title  UEFI Shell x86_64 v2
-efi    /EFI/shellx64_v2.efi

efiboot/loader/loader.conf

@@ -1,2 +1,5 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 timeout 3
-default archiso-x86_64
+default archiso-x86_64.conf

isolinux/isolinux.cfg

@@ -1,3 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 PATH /%INSTALL_DIR%/boot/syslinux/
 DEFAULT loadconfig
 

mkinitcpio.conf

@@ -1,2 +0,0 @@
-HOOKS=(base udev memdisk archiso_shutdown archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
-COMPRESSION="xz"

packages.x86_64

@@ -1,5 +1,10 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+amd-ucode
 arch-install-scripts
 b43-fwcutter
+base
+bind-tools
 broadcom-wl
 btrfs-progs
 clonezilla
@@ -8,13 +13,12 @@ darkhttpd
 ddrescue
 dhclient
 dhcpcd
-dialog
 diffutils
 dmraid
 dnsmasq
-dnsutils
 dosfstools
-elinks
+edk2-shell
+efibootmgr
 ethtool
 exfat-utils
 f2fs-tools
@@ -23,31 +27,39 @@ gnu-netcat
 gpm
 gptfdisk
 grml-zsh-config
-grub
+haveged
 hdparm
+intel-ucode
 ipw2100-fw
 ipw2200-fw
 irssi
 iwd
 jfsutils
+kitty-terminfo
 lftp
+linux
 linux-atm
 linux-firmware
 lsscsi
 lvm2
+lynx
 man-db
 man-pages
 mc
 mdadm
+memtest86+
+mkinitcpio
+mkinitcpio-archiso
+mkinitcpio-nfs-utils
 mtools
 nano
+nbd
 ndisc6
-netctl
 nfs-utils
 nilfs-utils
 nmap
 ntfs-3g
-ntp
+nvme-cli
 openconnect
 openssh
 openvpn
@@ -56,26 +68,30 @@ parted
 partimage
 ppp
 pptpclient
-refind-efi
+reflector
 reiserfsprogs
 rp-pppoe
 rsync
+rxvt-unicode-terminfo
 sdparm
 sg3_utils
 smartmontools
 sudo
+syslinux
+systemd-resolvconf
 tcpdump
+terminus-font
+termite-terminfo
 testdisk
 usb_modeswitch
 usbutils
-vi
-vim-minimal
+vim
 vpnc
-wget
 wireless-regdb
 wireless_tools
 wpa_supplicant
 wvdial
 xfsprogs
 xl2tpd
-reflector
+zsh
+wget

pacman.conf

@@ -2,6 +2,8 @@
 # /etc/pacman.conf
 #
 # See the pacman.conf(5) manpage for option and repository directives
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
 
 #
 # GENERAL OPTIONS
@@ -16,10 +18,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
@@ -99,7 +100,3 @@ Include = /etc/pacman.d/mirrorlist
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#[pwoss]
-#SigLevel = Optional TrustAll
-#Server = https://repo.pwoss.org/server/$arch/pkgs

syslinux/archiso.cfg

@@ -1,3 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 DEFAULT select
 
 LABEL select

syslinux/archiso_head.cfg

@@ -1,3 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 SERIAL 0 38400
 UI boot/syslinux/vesamenu.c32
 MENU TITLE Arch Linux
@@ -23,3 +26,5 @@ MENU COLOR timeout_msg  37;40   #80ffffff #00000000 std
 MENU COLOR timeout      1;37;40 #c0ffffff #00000000 std
 MENU COLOR msg07        37;40   #90ffffff #a0000000 std
 MENU COLOR tabmsg       31;40   #30ffffff #00000000 std
+
+MENU CLEAR

syslinux/archiso_pxe.cfg

@@ -1,35 +1,38 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 INCLUDE boot/syslinux/archiso_head.cfg
 
 LABEL arch64_nbd
 TEXT HELP
-Boot the Arch Linux (x86_64) live medium (Using NBD).
+Boot the Arch Linux install medium using NBD.
 It allows you to install Arch Linux or perform system maintenance.
 ENDTEXT
-MENU LABEL Boot Arch Linux (x86_64) (NBD)
-LINUX boot/x86_64/vmlinuz
-INITRD boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/archiso.img
+MENU LABEL Arch Linux install medium (x86_64, NBD)
+LINUX boot/x86_64/vmlinuz-linux
+INITRD boot/intel-ucode.img,boot/amd-ucode.img,boot/x86_64/archiso.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver}
 SYSAPPEND 3
 
 LABEL arch64_nfs
 TEXT HELP
-Boot the Arch Linux (x86_64) live medium (Using NFS).
+Boot the Arch Linux live medium using NFS.
 It allows you to install Arch Linux or perform system maintenance.
 ENDTEXT
-MENU LABEL Boot Arch Linux (x86_64) (NFS)
-LINUX boot/x86_64/vmlinuz
-INITRD boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/archiso.img
+MENU LABEL Arch Linux install medium (x86_64, NFS)
+LINUX boot/x86_64/vmlinuz-linux
+INITRD boot/intel-ucode.img,boot/amd-ucode.img,boot/x86_64/archiso.img
 APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt
 SYSAPPEND 3
 
 LABEL arch64_http
 TEXT HELP
-Boot the Arch Linux (x86_64) live medium (Using HTTP).
+Boot the Arch Linux live medium using HTTP.
 It allows you to install Arch Linux or perform system maintenance.
 ENDTEXT
-MENU LABEL Boot Arch Linux (x86_64) (HTTP)
-LINUX boot/x86_64/vmlinuz
-INITRD boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/archiso.img
+MENU LABEL Arch Linux install medium (x86_64, HTTP)
+LINUX boot/x86_64/vmlinuz-linux
+INITRD boot/intel-ucode.img,boot/amd-ucode.img,boot/x86_64/archiso.img
 APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/
 SYSAPPEND 3
 

syslinux/archiso_sys.cfg

@@ -1,13 +1,19 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 INCLUDE boot/syslinux/archiso_head.cfg
 
+DEFAULT arch64
+TIMEOUT 30
+
 LABEL arch64
 TEXT HELP
-Boot the Arch Linux (x86_64) live medium.
+Boot the Arch Linux install medium on BIOS.
 It allows you to install Arch Linux or perform system maintenance.
 ENDTEXT
-MENU LABEL Boot Arch Linux (x86_64)
-LINUX boot/x86_64/vmlinuz
-INITRD boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/archiso.img
+MENU LABEL Arch Linux install medium (x86_64, BIOS)
+LINUX boot/x86_64/vmlinuz-linux
+INITRD boot/intel-ucode.img,boot/amd-ucode.img,boot/x86_64/archiso.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
 
 INCLUDE boot/syslinux/archiso_tail.cfg

syslinux/archiso_tail.cfg

@@ -1,3 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 LABEL existing
 TEXT HELP
 Boot an existing operating system.
@@ -19,9 +22,17 @@ COM32 boot/syslinux/hdt.c32
 APPEND modules_alias=boot/syslinux/hdt/modalias.gz pciids=boot/syslinux/hdt/pciids.gz
 
 LABEL reboot
+TEXT HELP
+Reboot computer.
+The computer's firmware must support APM.
+ENDTEXT
 MENU LABEL Reboot
 COM32 boot/syslinux/reboot.c32
 
 LABEL poweroff
+TEXT HELP
+Power off computer.
+The computer's firmware must support APM.
+ENDTEXT
 MENU LABEL Power Off
 COM32 boot/syslinux/poweroff.c32